Flutesan RGB LED Light Strip Connectors 20 Waterproof LED Adapter Connectors Transparent Solderless LED Light Strip Connectors for Strip Light Unwired Gapless Track Connector 5V 12V 24V (4 Pin, 10 mm)

Saved so much time instead of solder, great connection. Fit inside my channels just fine!

Used these with multiple strips of LED lights and the only caveat is that they do not work with silicone-coated strips (which is expected). Had no issue opening or closing, none broke during installation, worked as expected. Good value overall, recommended.

Let me start off by saying I'm an electrician by trade and have wired hundreds if not thousands of electrical panels from scratch. So im not new to ALL sorts of wire. As far as functionality, these connectors were very hit or miss. They wouldn't stab through into the wire enough for adequate connection and I had to bend the fingers apart a little bit to get them to hit the conductive part on the light strip. Theyre easy enough to use in principle and if you're crafty enough, you can make them work. I will probably find a different route for my light boxes next time. I guess im just used to fantastic products like wago, and expected too much. I have a bunch to use up so maybe ill have better luck next time. No picture really needed. They look exactly as shown. Picture of my project though for reference of how I used them! (:

These initially worked great and I was happy to not spend my time soldering. We used them to install 14 strips of RGB tape into light boxes on a set. After a few days I had the Blue in one box fail at the connector, didn't think much of it so I replaced it, then over the next 2 days I have 3 more completely go out. These were static items that after install were never touched again. After I opened one of the other failed ones and removed the connector and saw that the common was completely fried I went through and just soldered the wires directly to the pads for all of them (which is what I should have just done from the start).I wouldn't trust these, they pierce through and obviously end up wiggling around enough that they don't maintain a solid connection after the initial crimp.

Well worth the money if you don't want to solder. I have used about a dozen so far and have 100% success.

They work well if you’re connecting the waterproof strips to thicker gauge rgb wire (like the multicolored ones sold on Amazon)The quality is kind of eh, some of the clips on the sides don’t fully engage and it hangs loosely, some of them clamp so tightly that you can’t pull them apart at all. Not super impressed with the quality. But certainly a good amount for the moneyThey do not work for connecting wires to more wires.

Works as intended, grabs the wire well, and snaps easily open closed.

The amount of time and effort saved just from these goobers are crazy. I don't have to fight for my life trying to solder those wires to the led strips anymore 😭😭😭😭. I had to use pliers to close the side with the wires since I got noddle arms, but so far these have been working great.