EFIELD 1/2-inch PEX Pipe Plumbing Installation Kit: 1/2-Inch X 200 ft Pex-b Tubing (100 ft Red + 100ft Blue), 12 Pcs Pex Brass Fittings, Cinch Clamp Fastening Tool and 20 Pcs 1/2" Clamps

This kit is great. It has everything that one would need to do some plumbing work. The tool is heavy duty and the pinch rings worked flawlessly. Great value for the price.

Exactly as described works as should for the project great value, easy to use, no leaks

I started with the idea of just moving a water heater but instead re-piped my entire (small) house with PEX after seeing how easy this kit is to use.For the price, this kit is hard to beat and if you're planning on using coil PEX I would strongly recommend it. The cinch system is amazing, I have installed over 150 cinches and haven't had a single leak (knock on wood).The quality of the fittings and cinch clamps is very similar to SharkBite and the pipe seems very sturdy and resilient.I did have an issue with the cinch tool, which could not be adjusted to spec. I chose to purchase a SharkBite cinch tool which worked great and cinched 150+ clamps without needing adjustment. The SharkBite tool is much higher quality but costs about 1/3 of this kit.However, Efield not only sent me a replacement tool (priority mail) which will be great for a backup, but provided a modest refund to cover the cost of some extra clamps that I had to re-do. This was all done automatically by Efield in response to my concern about the clamp tool.The customer service went above and beyond.A few things to keep in mind:* a tee will use 3 cinches, you will probably go through these very fast. I haven't noticed any difference between the SharkBite/Oetiker brand and these.* you will probably need more tees, and elbows. While PEX is "flexible", PEX B is not as flexible as I expected and it's easier to just add a fitting for a 90 degree bend. We tried using those PEX metal bend guides and I would not recommend them at all, as it was impossible to fit the pipe into them.* you will probably want to pick up straight PEX from the hardware store for any exposed PEX, as coil PEX is very different to keep straight, especially with little support.

Arrived early, easy to work with.

Doing a detached shower. It was long enough, the hose was sturdy but easy to work with. It works like a charm.

as advertised

Kit is perfect. Cutter and band clamp are decent quality also. It’s a little hard to get the clamps on the band and keep it in position but that’s not the kits fault, pex type b is just that way. Clamp didn’t need calibrated. Ran 60ft of 3/4 for new outdoor spigot and sink in my shop. All fittings and bands worked as should and had 0 leaks

I ordered this kit and several smaller sets of PEX from Efield for my shop air upgrade. The products arrived on time in good packaging and have put into service with no issues. I would recommend this Efield and will buy from them again